Thickness Meter เครื่องวัดความหนา ราคาถูก

CM-8856 เครื่องวัดความหนา

รายละเอียด: หมวด: เครื่องวัดความหนา; เผยแพร่เมื่อ วันพฤหัสบดี, 17 กันยายน 2558 09:41; เขียนโดย admin2; ฮิต: 17978

เครื่องวัดความหนา รุ่น CM-8856

It meets the standards of both ISO2178 and ISO 2361 as well as DIN, ASTMand BS.
It can be used both in the laboratory and in harsh field conditions.
The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminum , chrome etc.) on magnetic materials (e.g. iron, nickel etc.) . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminum tile, some alloy tile, paper etc.
The N probes measure the thickness of non - magnetic coatings on non-magnetic metals . It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.
Automatic substrate recognition.
Manual or automatic shut down.
Two measurement mode: Single and Continuous
Wide measuring range and high resolution.
Metric/Imperial conversion.
Digital backlit display gives exact reading with no guessing or errors.
Can communicate with PC computer for statistics and printing by the optional cable.
Can store 99 groups of measurements.
Statistics is available.

Specifications :

LCD display : 4 digits, 10mm LCD, backlit
Min. radius work piece: F: Convex 1.5mm/Concave 25mm N: Convex 3mm/ Concave 50mm
Min. measuring area: 6mmMin.
Sample thickness : 0.3mm
Coating thickness range : 0 - 1250 um / 0 - 50 mil (other range is available, please check with us This email address is being protected from spambots. You need JavaScript enabled to view it. )
Resolution : 0.1 um (0 - 99.9 um) ; 1 um (over 100um)
Accuracy : ± 1 - 3% n or 2.5 um or 0.1mil (whichever is greater)
Power supply : 2 x AAA batteries
Operation Temperature : 0 - 50°C
Operation Humidity : below 80%
Dimensions: 126 x 65 x 35 mm (5.0 x 2.6 x 1.6 inch)
Unit weight : 260g (batteries included)