Thickness Meter เครื่องวัดความหนา ราคาถูก

45MG OLYMPUS เครื่องวัดความหนา Ultrasonic Thickness Gage

 

 

เครื่องวัดความหนา รุ่น 45MG  Brand. OLMPUS

Ultrasonic Thickness Gage

 

 

คุณสมบัติ

  • วัดความหนา
  • โหมดค่าต่ำสุด/สูงสุด
  • สองโหมดเตือน
  • โหมดที่แตกต่าง
  • อัตราการลดลง
  • ป้องกันด้วยรหัสผ่านที่ใช้ในการล็อค
  • ทนทาน ออกแบบให้มีระดับการป้องกัน IP67
  • ปุ่มกดที่เรียบง่าย สะดวกต่อการใช้งาน
  • พอร์ตการเชื่อมต่อ USB
  • สามารถตัดข้อมูลเป็นตัวเลข 475000 ค่า หรือ 20000 รูปคลื่น

 

อ่านเพิ่มเติม: 45MG OLYMPUS เครื่องวัดความหนา Ultrasonic Thickness Gage

27MG เครื่องวัดความหนา Ultrasonic Thickness Gage

 

 

 

เครื่องวัดความหนา รุ่น 27MG  

Ultrasonic Thickness Gage

 

 Specification : 

Measurements

Dual element transducer measurement mode

Time interval from a precision delay after the excitation pulse to the first echo

Thickness range

0.50 mm to 635 mm (0.020 in. to 25.0 in.) depending on material, transducer, surface conditions, temperature

Material velocity range

0.508 mm/μs to 18.699 mm/μs (0.020 in./μs to 0.7362 in./μs)

Resolution (selectable)

Low: 0.1 mm (0.01 in.) 
Standard: 0.01 mm (0.001 in.)

Transducer frequency range

2.25 MHz to 10 MHz (–3 dB)

อ่านเพิ่มเติม: 27MG เครื่องวัดความหนา Ultrasonic Thickness Gage

PCE-CT 25 PCE เครื่องวัดความหนา Thickness Meter

 

 

 

เครื่องวัดความหนา รุ่น PCE-CT 25

Thickness Meter

 

รายละเอียด : 

  • เครื่องวัดความหนาเหล็ก กล้า / เหล็กและโลหะที่ไม่ใช่เหล็ก
  • น้ำหนักเบา
  • เซ็นเซอร์ในตัว (ทำความสะอาดง่ายมาก)
  • ออกแบบตามหลักสรีรศาสตร์
  • ใช้งานง่ายสำหรับการใช้งานระดับมืออาชีพหรือส่วนบุคคล
  • ย้อนแสง
  • จอแสดงผลแอลซีดี
  • ฟังก์ชั่นการสอบเทียบ
  • ออโต้ปิดเพื่อป้องกันแบตเตอรี่
  • กระเป๋าถือ

อ่านเพิ่มเติม: PCE-CT 25 PCE เครื่องวัดความหนา Thickness Meter

TM-8812C เครื่องวัดความหนา

 

เครื่องวัดความหนาเหล็ก รุ่น TM-8812C 

รายละเอียด :

  • ความละเอียด 0.01 มิลลิเมตร
  • ช่วงการวัด 1.0 ถึง 200 มิลลิเมตร หรือ 0.04 ถึง 8 นิ้ว
  • Sound Velocity  1000 ถึง 9000 m/s
  • ความแม่นยำ +-(0.5%n + 0.1)
  • ใช้หลักการวัดแบบ Ultrasonic
  • พร้อมด้วย Calibration Block
  • ปิดเครื่องอัตโนมัติเมื่อไม่ใช้งาน
  • แจ้งเมื่อระดับแบตเตอรี่ต่ำ
  • Automatic memory material code and the value of sound velocity
  • สามารถเชื่อมต่อกับคอมพิวเตอร์ผ่านพอร์ต RS232 (ต้องซื้อเพิ่ม)

 

อ่านเพิ่มเติม: TM-8812C เครื่องวัดความหนา

VA8042 เครื่องวัดความหนาสี

 

 

เครื่องวัดความหนาสี รุ่น VA8042

 

คุณสมบัติ

  • วัดแบบเหนี่ยวนำแม่เหล็กไฟฟ้า
  • จอแสดงผลแบบแอลซีดี 4 ดิจิท
  • ฟังชั่นการสอบเทียบ
  • ขนาดเล็ก พกพาสะดวก
  • เปลี่ยนหน่วยการวัดเป็น μm  หรือ mil
  • ความแม่นยำสูง
  • แสดงสถานะการคัปปลิ๊ง
  • ปิดเครื่องอัตโนมัติ
  • แจ้งเมื่อแบตเตอรี่ต่ำ
  • ตรงตามมาตรฐาน EC directive: 89/336/EEC
  • ภายในกล่องประกอบด้วย โพรบ, แผ่นความหนามาตรฐาน x 5 , บล็อกสแตนเลส, คู่มือ, แบตเตอรี่, กล่องพลาสติก

 

อ่านเพิ่มเติม: VA8042 เครื่องวัดความหนาสี

CM-8856 เครื่องวัดความหนา

เครื่องวัดความหนา รุ่น CM-8856

 

  • It meets the standards of both ISO2178 and ISO 2361 as well as DIN, ASTMand BS.
  • It can be used both in the laboratory and in harsh field conditions.
  • The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminum , chrome etc.) on magnetic materials (e.g. iron, nickel etc.) . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminum tile, some alloy tile, paper etc.
  • The N probes measure the thickness of non - magnetic coatings on non-magnetic metals . It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.
  • Automatic substrate recognition.
  • Manual or automatic shut down.
  • Two measurement mode: Single and Continuous
  • Wide measuring range and high resolution.
  • Metric/Imperial conversion.
  • Digital backlit display gives exact reading with no guessing or errors.
  • Can communicate with PC computer for statistics and printing by the optional cable.
  • Can store 99 groups of measurements.
  • Statistics is available.

Specifications :

  • LCD display : 4 digits, 10mm LCD, backlit
  • Min. radius work piece: F: Convex 1.5mm/Concave 25mm N: Convex 3mm/ Concave 50mm
  • Min. measuring area: 6mmMin.
  • Sample thickness : 0.3mm
  • Coating thickness range : 0 - 1250 um / 0 - 50 mil (other range is available, please check with us This email address is being protected from spambots. You need JavaScript enabled to view it. )
  • Resolution : 0.1 um (0 - 99.9 um) ; 1 um (over 100um)
  • Accuracy : ± 1 - 3% n or 2.5 um or 0.1mil (whichever is greater)
  • Power supply : 2 x AAA batteries
  • Operation Temperature : 0 - 50°C
  • Operation Humidity : below 80%
  • Dimensions: 126 x 65 x 35 mm (5.0 x 2.6 x 1.6 inch)
  • Unit weight : 260g (batteries included)

Standard Delivery:

  • 1x CM-8855 coating thickness gauge (main unit)
  • 1x blue storage case with handle
  • 4x Calibration foils
  • 1x Aluminum substrate
  • 1x Iron substrate
  • 1x Operation Manual

Optional accessories:

  • 1. USB adaptor+RS-232C cable + software